The Cameron GROVE BT1 top-entry ball valve is an advanced design of top-entry ball valves, manufactured in a wide range of diameters and pressure classes. In the standard versions, the valve is suitable for transmission pipelines, pumping, compression and reinjection units, offshore platforms, onshore terminals, pig traps, measuring stations, and surge-relief skids. Whenever ball valves are used in critical service applications, in-situ field repairability with quick turnaround often is needed.


Standard Features
  • Size range: 1/2" to 12"
  • ANSI classes: 150# to 1500#
  • Trunnion-mounted design
  • Triple-barrier stem seals
  • Anti-blowout stem design
  • Stem emergency grease fitting
  • Factory-positioned external stops for a permanent reference to open and closed positions
  • Low-friction, metal-backed, self-lubricating PTFE sleeve bearings and thrust washers
  • Plastic polymer insert for seat sealing
  • Double-piston effect (DPE) seat rings (double-sealing barrier in both directions)
  • Double block-and-bleed capability
  • Pressure-relief valve in the body cavity to prevent pressure lock
  • Electroless nickel coating on pressure-controlling parts and stem
  • Body thickness in accordance with ASME B16.34
  • In-line repairable
  • CE marking (PED Directive)
Optional Features
  • Self-relieving seat rings
  • Lubricated seats
  • PTFE spring-energized lip seals for seat and stem sealing
  • Metal-to-metal seat sealing
  • SS or INCONEL® 625 overlay on sealing areas
  • Explosive decompression-resistant seals (standard for Class 600 and higher)
  • Antistatic device
  • Features to allow vertical installation and maintenance
Standards Compliance
  • Fire-safe in accordance with API 6FA and BS 6755 Part 2
Body Construction
  • Body bonnet design features bolted construction, and its sizing complies with requirements given in ASME VIII Div. 1
  • Bolted construction allows in-line disassembly for inspections and potential repairs
  • Removing the bonnet from the valve allows free access to the ball and the seats, which can simultaneously be taken out without the need for any special maintenance tools
  • After maintenance, seating surface integrity can be assessed by pressurizing the body cavity only, before any repressurization of the pipeline (standard DPE design)
  • Body drain provided in the lowest part of the body cavity, featuring an NPT drain valve with a safety plug

*INCONEL is a trademark of Special Metals Corporation group of companies