API Spec 6A Technologies | Schlumberger Products

API Spec 6A Technologies

Improve safety performance with ensured reliability

Cameron designs and manufactures various types of API Spec 6A valves suitable for the demanding environments of onshore and offshore drilling and production, including

  • large-bore completions
  • pressure and temperature extremes
  • heavy oil, sour, and subsea applications.
Array of API Spec 6A valves and actuators offered by Cameron.

Actuators

Hydraulic Actuators

Recommended for large-bore and high-pressure valves

Used in high thrust applications when there is no gas source or when the well gas is too sour.

Hydraulic Wirecutting Actuators

Cut wireline cable, braided line, or CT

Use as a conventional actuator to open or close a gate valve during normal production periods.

Pneumatic Diaphragm Actuators

Built to the industry’s highest standards

Rely on a simple design and operating principle.

Pneumatic Piston Actuators

Used in air operated systems

Perform sequenced closure during shutdown operations.

Actuator Accessories

Complementary products

Adapt to existing actuators in the field or installed on new manufactured actuators.

Choke Valves

HT-Rated

Choke

For all heavy oil recovery operations, including SAGD and CSS.

Compact Insert-Retrievable Chokes

35% smaller, 45% lighter

Achieve total vertical access for insert retrieval.

Insert-Retrievable Chokes

Time-tested designs

Retrieve the trim, actuator, and retention mechanism to surface.

Nonretrievable Chokes

800 installed to date

Mount to a subsea structure or incorporate into retrievable FCM or choke bridge.

Frac Valves

Frac Valves

High-pressure valves to improve fracturing efficiency

Maximize corrosion and erosion protection, streamline maintenance, and minimize NPT and related costs.

Expanding-Style Gate Valves

M-HT

API Spec 6A expanding gate valve

Withstand temperatures up to 650 degF [343 degC].

M Pow-R-Seal

API Spec 6A expanding gate valve

Metal-to-metal seal technology throughout.

Power-Actuated Gate Valves

FLS-DA2

API 6A double-acting actuated gate valve

For positive control of frac valves.

M Saf-T-Seal

API 6A power-actuated fullbore through-conduit gate valve

Available in trims for most types of oilfield service.

Slab-Style Gate Valves

FL-HT

Steam service API 6A slab-style high-temperature gate valve

For 0 to 650 degF [–18 to 343 degC].

FLS

Extreme service API 6A slab-style gate valve

For extreme sour and subsea applications.

FLS-DAN

API 6A double-acting actuated drilling gate valve

Standard double flange, threaded-end, and special block body configurations.

FLS-R

Large-bore HP API 6A slab-style gate valve

Greatly reduce the torque required for operation.

M STS-2

API 6A manual slab-style gate valve

Outstanding sealing performance across a wide range of conditions.

Wedge Slab Gate Valves

FLS-S

API 6A split slab-style gate valve

Perform a flowline seal test simultaneously on both flow directions.

Share This