Off-center tool joint shear rams
Shear tool joint hardbanding and off-center tubulars.
Based on our experience with the U surface ram-type BOP, UII subsea ram-type BOP, and T-81 small-bore, compact ram-type BOP, the TL offshore ram-type BOP offers the same quality, reliability, and performance in a lighter design.
Our TL BOP helps decrease downtime by simplifying maintenance, featuring side ram removal and hydraulically opening bonnets that simplify ram changeout. Seal replacement does not require bonnet removal, and bonnet seal carriers eliminate the need for high makeup torque on bonnet studs and nuts. Access caps on the ram-change pistons also enable easier access from the end of the bonnet. For improved safety and performance, ST locks and wedge locks can be interlocked with the TL BOP operating system using sequence caps to ensure the lock is retracted before applying pressure to open the BOP.
|Bore sizes and working pressures
13 5/8 in: 25,000 psi
18 3/4 in: 5,000, 10,000, 15,000, and 20,000 psi
|| Single, double, and triple
|Locks and working pressures
|| Hydraulic locks
Ram locks: 5,000, 10,000, and 15,000 psi
ST locks: 10,000, 15,000, 20,000, and 25,000 psi
Wedge locks: 5,000
|| Bonnet studs
|| Tandem booster bonnets and BroadShear ram bonnets available
|| Field-replaceable bonnet cylinders, pistons, and seals
|| NACE and monogrammability to API Specification 16A
Drilling and production operations that include wireline, braided cable, dual strings, or high- temperature well environments.
Enable sealing a standard BOP on several different pipe diameters.
Form one-half of a ram cavity's seal with the packer, top seal, and ram body acting in unison.