Cameron's NUFLO™ series 1000 watercut monitor is a solid state electronic instrument that determines the percent watercut in an oil emulsion without requiring the physical separation of the fluids. The capacitance probe technique employed by the watercut monitor allows the emulsion stream to be continuously surveyed. The frequency generated by the capacitance probe oscillator is determined by the watercut of the emulsion stream in the probe.

The watercut monitor compensates for the non-linear relationship between frequency and watercut by strictly digital techniques. The result is a 4-20mA output signal which varies linearly with watercut. The 4-20mA output of the watercut monitor may be a completely floating signal because of the use of optoisolation circuitry. This mode of operation requires the optional isolating power supply board or the use of two external power supplies. The watercut monitor may be operated with a single external power supply if a floating output signal is not required.


Standard Features
  • Watercut Monitor: 12-30 VDC, 150mA Max., 5mV peak to peak Max. ripple
  • Analog Output: 24-48 VDC, 20 mA Max., 5mV peak to peak Max. ripple
  • Temperature Range: 0-158ºF
  • Probe Size: 2-in.- 6-in.
  • Probe End Connections: 2-in.- 6-in.
  • Watercut Range: 0-100% Standard, other ranges available be special request
  • Output: 4-20mA linear signal representing 0-100% watercut (standard)
  • Accuracy: 1% over 0-100% range with homogeneous emulsion



Product Information & Inquiries +1.281.582.9500
Middle East & North Africa - Sales +971.4.802.7751
Sub-Saharan Africa - Sales +44.7584.490.636
Asia Pacific - Sales +60.3.7954.0145
Asia Pacific - Sales +86.10.5320.9400