Overview

CAMERON CamCor CT Series
The CAMERON CamCor CT Series custody transfer coriolis flow meter – featuring precision accuracy and dual deep U sensor tubes – is specifically designed for custody-transfer applications. This top-of-the-line Coriolis flow meter offers the highest performance for accuracy, repeatability, wide flow range, low pressure loss, and safe design.

CAMERON CamCor PRO Series
The CAMERON CamCor PRO Series process coriolis flowmeter – featuring high-accuracy, shallow bow-shaped dual sensor tubes – is ideal for oilfield production applications. Our process-grade Coriolis flow meter offers high performance for accuracy, repeatability, wide flow range, low pressure loss, and safe design.

Specifications

CAMERON CamCor CT Series
Cameron CamCor CT Series
  • Deep U-shaped dual sensors maximize accuracy
  • Flow rate turndown up to 200:1
  • Transmitters available as integral or remote-mounted
  • Low-temperature models suitable for cryogenic fluids, such as LNG, down to -328˚F (-200˚C)
  • High-temperature models suitable for temperatures up to +662˚ F (+350˚ C)
  • Extensive I/O count, including dual independent pulse outputs, dual independent analog outputs, status input, and status output
  • Communications: Modbus* RS-485 and HART* compliant
  • Easy configuration via infrared sensors or EZ-Link interface software
  • Self-diagnostic display informs user of potential problems
  • Diagnostic check for pipeline vibration and media pulsation
  • Suitable for liquids and gases
  • Standard sensor sizes from from <1mm through 10” 
  • End connections offered: ASME flanged, DIN flanged, threaded, or tri-clover ferrule (depending on the model)
  • Ability to measure rates from 0-0.032 GPH to 0-423,000 BPD*
  • Flow rate uncertainty on liquids +/- 0.1% (+/- zero stability error)
  • Density uncertainty +/- 0.0005 g/ml (CC003 through CC250)
  • Wetted materials are 316/316L SST or Alloy C22
  • Complies with CSA, ATEX / IECEx for use in hazardous areas
  • Ingress protection rated to IP66/67
CAMERON CamCor PRO Series
Cameron CamCor PRO Series
  • Shallow bow-shaped dual sensors maximize accuracy
  • Flow rate turndown up to 50:1
  • Transmitters available as integral or remote-mounted
  • Extensive I/O count, including dual independent pulse outputs, dual independent analog outputs, status input, and status output
  • Communications: Modbus* RS-485 and HART* compliant
  • Easy configuration via infrared sensors or EZ-Link interface software
  • Self-diagnostic display informs user of potential problems
  • Diagnostic check for pipeline vibration and media pulsation
  • Suitable for liquids only
  • Nominal sensor sizes from 1/4” through 2”
  • End connections offered: ASME flanged, threaded and tri-clover ferrule (depending on the model)
  • Ability to measure rates from 0.264 GPM to 423 GPM*
  • Flow rate uncertainty on liquids +/- 0.2% (+/- zero stability error)
  • Density uncertainty +/- 0.003 g/ml
  • Wetted materials are 316/316L SST
  • Complies with CSA, ATEX / IECEx for use in hazardous areas
  • Ingress protection rated to IP66/67